Things you’ll need to complete the droid

MK4 complex body + MK4.1 dome, with traditional and modular Cortex control options.

Whole-build planning checklist • v0.3 • October 10, 2026. Body/dome manual hardware is counted below; the owner-supplied MK4 drive fastener list is now included; other legs, drive electronics and accessory BOMs remain pending. Rows marked “specification pending” are not ready-to-buy selections.

Traditional controller route

Choose a compatible gamepad host and sequencing ecosystem, such as a Mega/USB-host arrangement with Maestro servo controllers. Dedicated lighting and audio boards remain valid options.

Well-established specialist hardware, documented by its makers. Controller support, banks and wiring depend on the chosen stack; these examples are alternatives, not one mandatory kit.

See traditional options ↓

Modular Cortex route

Separate Body, Dome, Optical and optional Network roles. Add a role as hardware is installed, keep unused features hidden, and preview future mechanisms in diagnostics.

Body’s compatible Bluepad32 build replaces the gamepad-host role. Body/Dome software plus suitable interfaces aim to replace sequencing roles. Keep motors, motor drivers, servos, lighting, audio and regulated power.

See Cortex options ↓
Compare equivalent builds. Both routes need the shared mechanical and electrical hardware. Our full-size output commissioning and proposed servo interfaces still need validation. No total-price or savings claim is made until compatible components, software membership and optional add-ons are included. A listing match does not establish installation compatibility.

Print files are not included. Obtain them through your separate MrBaddeley membership. This checklist is BigBob’s compilation, not an official complete MrBaddeley BOM.

As an Amazon Associate I earn from qualifying purchases. Amazon links use BigBob’s affiliate tag. Prices and availability are shown by Amazon. Repeated pack links supply multiple rows—check contents and buy only the total required.

What changes between the two routes?

FunctionTraditional optionCortex option / advantage
Gamepad hostMega 2560 + USB host shield + compatible dongleBody ESP32 + compatible Bluepad32 firmware; button/stick assignments in our interface
Servo sequencingMaestro controller banksBody/Dome roles + proposed servo interfaces; feature configuration and visual diagnostics. Interface validation pending.
Traction and dome driveAppropriately rated motor drivers, such as selected Sabertooth/SyRen modelsKeep rated drivers and motors; Cortex supplies the commands, not motor power
Lighting and soundCompatible display lights, playback hardware, amplifier and speakerKeep output hardware; add unified selection and control as each interface is supported
Expansion and displaysStack-specific accessories and wiringAdd Optical, Network or display roles gradually. Optional features can be hidden or previewed; CYD add-on is upcoming/beta.
Printed structure
Body, dome, legs, feet, center leg, skins, hinges, gears, brackets and greebles

Shared

Selected file sets
MrBaddeley print files require a separate membership. Files are not included with BigBob software. Legs and drive version must match.

Source: Body pp2–3; Dome pp3–18

Exact Amazon item not selected.

PETG and any flexible drive material

Shared

According to selected print files
Black PETG is BigBob’s main material. Flexible rollers/belts are drive-version dependent; 30+ rolls is an owner-reported project statistic, not a purchase quantity.

Source: Build plan

Exact Amazon item not selected.

Body frame
M6 threaded rod, 497 mm

Shared

3
Cut 500 mm stock to length; deburr ends. Amazon four-pack can supply all four rods.

Source: Body p11

Amazon candidate ↗
M6 threaded rod, 400 mm

Shared

1
Cut fourth rod from the same four-pack; do not buy two packs.

Source: Body p11

Amazon candidate ↗
M6 nuts

Shared

8
Four lower and four upper; temporary assembly washers are additional.

Source: Body pp11,15

Exact Amazon item not selected.

Fasteners
M3×10 countersunk screws

Shared

61
Body subtotal: 11+4+8+8+2+4+24; excludes legs/feet and optional mechanisms.

Source: Body pp9,12,15,17,29–30

Amazon candidate ↗
M3×15 countersunk screws

Shared

15
8 body-bar screws already include the 4 lower hinge screws repeated on p21; plus 4 servo-mount and 3 rear-panel screws.

Source: Body pp10,21–22,32

Exact Amazon item not selected.

M3×6 countersunk screws

Shared

14
2 middle joints, 4 upper hinges, 8 pinion covers. Do not lengthen drawer cover screws.

Source: Body pp12,21,26

Amazon candidate ↗
M3×8 countersunk screws

Shared

16
Drawer servo frames.

Source: Body p26

Amazon candidate ↗
M3×18 countersunk screws

Shared

3
Small-door servo brackets.

Source: Body p24

Exact Amazon item not selected.

M3×20 countersunk screws

Shared

4
Skirt base/guide plates.

Source: Body p19

Amazon candidate ↗
M3×25 countersunk screws

Shared

14
8 skirt plus 6 dome-ring screws. Rear-panel p32 also requires 3 M3×25 screws; head style is not stated there.

Source: Body pp18–19; Dome p11

Amazon candidate ↗
M3×50 countersunk screws

Shared

4
Body bars; maker permits 50–90 mm depending on engagement.

Source: Body p15

Exact Amazon item not selected.

M3×5 countersunk screws

Shared

6
Coin slots.

Source: Body p29

Exact Amazon item not selected.

M3×12 countersunk screws

Shared

4
Radar eye.

Source: Dome p16

Amazon candidate ↗
M3×8 button-head screws

Shared

30
Segmented 250 mm dome; omit for single-piece dome where applicable.

Source: Dome p7

Exact Amazon item not selected.

M3×5 button-head screws

Shared

14 plus rear-panel doors
8 breadpan plus 6 small-door screws; p32 does not state rear-door screw quantity.

Source: Body pp23–24,32

Exact Amazon item not selected.

M3×6 button-head screws

Shared

8
Drawer gear pivots; countersunk is also allowed here.

Source: Body p25

Exact Amazon item not selected.

M3×10 button-head screws

Shared

6
2 rear coin returns plus 4 hex-port screws.

Source: Body pp29,31

Exact Amazon item not selected.

M3×20 button-head screws

Shared

18
6 front-vent/frame plus 12 side-vent screws. Maker permits 10 mm for the front-vent/frame six.

Source: Body pp29–30

Exact Amazon item not selected.

M3×15 button-head screws

Shared

Verify quantity
Rear center door; quantity not specified in text.

Source: Body p32

Exact Amazon item not selected.

M3×25 screws, rear panel

Shared

3
Confirm head style against printed recess.

Source: Body p32

Exact Amazon item not selected.

M3×10 grub/set screws

Shared

48
38 body + 10 segmented dome/ring. Count depends on single-piece variants.

Source: Body pp9,21,24; Dome pp8,10

Amazon candidate ↗
M3 nuts

Shared

44
8 body + 30 segmented-dome + 6 dome-ring nuts mentioned in p11 prose.

Source: Body pp17,19; Dome pp7,11

Exact Amazon item not selected.

M3 washers

Shared

4 minimum
Four explicitly in base/guide assembly prose; add mechanism-specific washers separately.

Source: Body p19

Exact Amazon item not selected.

Assortment pack coverage check

Shared

Before ordering
The linked 810-piece flat-head assortment is a sourcing candidate, not a complete fastener kit. Check per-size counts; buy missing 5/15/18/50 mm lengths, button-head and set screws separately. Several rows use the same pack; do not buy it once per row.

Source: Amazon candidate reviewed 2026-10-06

Amazon candidate ↗
Retention and linkages
10 mm diameter × 5 mm neodymium magnets

Shared

12 explicit + 6 matching rear-panel mates
Six body-frame + six dome-ring magnets explicitly specified. Allow six mating magnets in rear panel, inferred from paired retention; verify chosen prints.

Source: Body p15; Dome p11

Amazon candidate ↗
1.75 mm nylon/PC filament for hinge pins and drawer push cables

Shared

Cut to fit
Nylon hinge pins or maker’s 1.5 mm rod/paperclip alternative; PC/nylon drawer cables. These are not printed drive belts.

Source: Dome p13; Body pp25–27

Exact Amazon item not selected.

Servo linkages/push rods

Shared

19–20
12–13 dome + 4 breadpan + 3 small-door linkages. Utility arms and custom lifts need additional linkage hardware.

Source: Dome p13; Body pp22,24

Exact Amazon item not selected.

Cable ties

Shared

24 minimum
13 dome + 3 small backboxes + 8 drawers, plus harness ties.

Source: Dome p13; Body pp24,27

Exact Amazon item not selected.

Servos
MG90S dome panel/pie servos

Shared

12 or 13
Positional servos, not continuous-rotation versions; supplied screws and horns required. Amazon pack is an owned model, not a guarantee of TowerPro authenticity.

Source: Dome p13

Amazon candidate ↗
MG92B breadpan servos

Shared

4
MG90/SG90 alternatives may need mount changes and load checks. Owned MG90S is an alternative candidate, not an exact MG92B.

Source: Body p22

Amazon candidate ↗
MG92B small-door servos

Shared

3
Count derived from three described assemblies. MG90/SG90 alternatives mentioned; validate clearance and torque.

Source: Body p24

Amazon candidate ↗
MG92B or MG90 drawer servos

Shared

8
Baseline body total 15, dome 12–13; combined 27–28. Optional arms/HP/lifts excluded.

Source: Body p25

Amazon candidate ↗
Servo extension cables and horns/mount screws

Shared

Per routing
Count/length after dry assembly; supply horns and screws with each servo. Extension cables must suit actual current.

Source: Harness plan

Amazon candidate ↗
Rolling chassis and dome drive
Left and right legs, ankle pivots and load-bearing hardware

Shared — specification pending

2 assemblies
Bearings, axle/shoulder hardware, spacers and retaining hardware require selected leg manual.

Source: Selected legs/feet/drive manuals required

Exact Amazon item not selected.

Left and right foot-drive motors

Shared — specification pending

2
Exact voltage, shaft, mounting, gearing and stall current require selected foot-drive manual. N20 bench motors are not full-size replacements.

Source: Selected legs/feet/drive manuals required

Exact Amazon item not selected.

Foot wheels, omniwheels/rollers, axles, bearings and adapters

Shared — specification pending

2 drive assemblies
Exact sizes and counts pending. MKIII herringbone direct drive differs from earlier belt-drive designs.

Source: Selected legs/feet/drive manuals required

Exact Amazon item not selected.

Foot transmissions, gears or belts, tensioners and fasteners

Shared — specification pending

2 sets
Use only the parts required by the selected drive variant.

Source: Selected legs/feet/drive manuals required

Exact Amazon item not selected.

Center leg and center-foot wheels/rollers

Shared — specification pending

1 assembly
Center leg is not automatically a powered traction wheel; verify chosen design.

Source: Selected legs/feet/drive manuals required

Exact Amazon item not selected.

2–3–2 shoulder/center-leg linkage and retention

Shared — specification pending

1 selected system
Supplied body describes manual 2–3–2. Motorizing it is an optional adaptation with load calculations.

Source: Selected legs/feet/drive manuals required

Exact Amazon item not selected.

Dome bearing/lazy Susan, mounting ring and fasteners

Shared — specification pending

1 set
Match selected MK4 body/dome ring and bearing dimensions.

Source: Selected legs/feet/drive manuals required

Exact Amazon item not selected.

Dome rotation motor, mount and drive wheel/gear

Shared — specification pending

1 assembly
Dome rotates relative to body; motor specification pending matching drive files.

Source: Selected legs/feet/drive manuals required

Exact Amazon item not selected.

Dome power/signal transfer, pogo connectors or slip ring

Shared — specification pending

1 chosen system
Match rotation/travel and removable dome design; contact current and pinout must be validated.

Source: Selected legs/feet/drive manuals required

Exact Amazon item not selected.

Optional mechanisms
Front folding utility arms and actuators/linkages

Optional

2 arm assemblies
Matching utility-arm manual required for servo count and hardware.

Source: Selected accessory manual / BigBob custom design

Exact Amazon item not selected.

Moving holoprojector hardware/servos

Optional

Optional, per mechanism
Stock lighting-only HP requires no pan/tilt servo.

Source: Selected accessory manual / BigBob custom design

Exact Amazon item not selected.

Periscope/camera lift and upper panel linkage

Optional

Optional
User addition: lift actuator plus panel servo; 360 camera does not need pan/tilt.

Source: Selected accessory manual / BigBob custom design

Exact Amazon item not selected.

Raising dome center and lift mechanism

Optional

Optional
Custom BigBob addition. Stock dome manual glues top center in place.

Source: Selected accessory manual / BigBob custom design

Exact Amazon item not selected.

Tool extensions and other actuators

Optional

Optional
Specify travel, load, end stops and mount before purchase.

Source: Selected accessory manual / BigBob custom design

Exact Amazon item not selected.

Lighting and optics
Front logic displays, rear logic display, 2 PSI and 3 HP lights

Shared

1 dome set
Astropixels is the maker’s example. Choose one compatible light system; raw LED strips are not a drop-in substitute.

Source: Dome p17

Exact Amazon item not selected.

38 mm clear glass dome cabochons

Shared

3
Exact 38 mm required. Amazon search returned 35/40 mm options, so no unsuitable substitute is linked.

Source: Dome p15

Exact Amazon item not selected.

1 mm clear lens sheet for logic displays

Shared

Cut to fit
Sandwich in printed frame; verify material and panel outline.

Source: Dome p17

Exact Amazon item not selected.

Body/charge-bay/data-port lighting

Shared

Optional set
Chosen lighting boards need mechanical/protocol fit; no stock board prescribed.

Source: Body p24

Exact Amazon item not selected.

Addressable 5 V LED strip for custom effects

Shared

Optional
Owned strip for custom lighting, not replacement for Astropixels display PCBs.

Source: BigBob expansion

Amazon candidate ↗
Sound
Sound playback board and audio storage

Shared

1 system
Traditional example: MP3 Trigger. Cortex still needs an audio output/playback implementation; it does not remove the amplifier/speaker.

Source: Selected control stack

Exact Amazon item not selected.

Amplifier and suitable speaker

Shared

1 system
Owned 3 W / 8 ohm mini speaker is a bench/compact candidate, not a confirmed loud full-size system.

Source: Audio power design

Amazon candidate ↗
Sound files and microSD card

Shared

1 library/card
Use sounds with permission; format/capacity per actual player.

Source: Chosen sound player

Exact Amazon item not selected.

Power and wiring
Battery and correct charger

Shared

1 set
Chemistry, capacity and current sized to completed droid; charger must match pack.

Source: Build electrical design

Exact Amazon item not selected.

Kobalt battery adapter

Shared

Per battery layout
Owned power-wheels adapter; does not regulate voltage or establish low-voltage protection.

Source: Build electrical design

Amazon candidate ↗
Battery low-voltage protection/BMS

Shared

Per battery system
Confirm what pack/adapter provides; prevent overdischarge.

Source: Build electrical design

Exact Amazon item not selected.

Main disconnect, main fuse and branch fuses

Shared

1 distribution system
Ratings determined from wire, pack and measured motor/servo currents.

Source: Build electrical design

Exact Amazon item not selected.

Physical emergency stop and hardware motion enable

Shared

1 system
Independent of Wi-Fi; no automatic motion restart after wake/reconnect.

Source: Build electrical design

Exact Amazon item not selected.

Motor, servo and 5 V logic regulators

Shared

Per voltage rail
Input rated above fully charged pack; servo supply sized for simultaneous loads. Existing 24 V-max mini buck is not selected for nominal-24 V Kobalt pack.

Source: Build electrical design

Exact Amazon item not selected.

3.3 V regulation/logic-level conversion

Shared

Where required
Often on ESP board; do not add an unnecessary regulator. Check each signal and interface.

Source: Build electrical design

Exact Amazon item not selected.

Power-distribution terminals, wire and connectors

Shared

Per harness
Select gauge/contact rating from load and length; separate high-current routes from signal wiring.

Source: Build electrical design

Exact Amazon item not selected.

Ground/reference wiring and signal protection

Shared

Per interface
Common reference where required, appropriate level shifting, decoupling and suppression.

Source: Build electrical design

Exact Amazon item not selected.

Heat-shrink, strain relief, cable sleeving and tie mounts

Shared

Per harness
Protect moving cables; leave service loops and removable connectors.

Source: Build electrical design

Exact Amazon item not selected.

Board standoffs, insulated mounting and covers

Shared

Per board
Prevent exposed terminals touching frame/hardware.

Source: Build electrical design

Exact Amazon item not selected.

Traditional controls
Arduino Mega 2560 central host

Traditional option

Per chosen stack
One possible controller ecosystem, not an official universal Baddeley BOM. Choose a compatible complete stack; do not buy every alternative.

Source: Illustrative SHADOW-era architecture

Amazon candidate ↗
USB host shield + supported Bluetooth dongle

Traditional option

Per chosen stack
Cortex Body with Bluepad32 replaces the compatible gamepad-host role. Shield still needs compatible library, controller and dongle.

Source: Illustrative SHADOW-era architecture

Amazon candidate ↗
Maestro servo/sequence controller banks

Traditional option

Enough for selected servo count
18-channel assembled Amazon option is linked; 27–28 baseline servos require multiple banks or another suitable configuration.

Source: Pololu Maestro manufacturer documentation

Amazon candidate ↗
Dual traction motor driver + dome motor driver

Shared — specification pending

1 each
Examples Sabertooth and SyRen. These are retained with Cortex; no exact Amazon listing verified, and model/rating remains motor dependent.

Source: Selected motor ratings / traditional builder diagram

Exact Amazon item not selected.

Bluetooth game controller

Shared

1 compatible controller
Existing Xbox/PS controller may be reused only if compatible with the chosen ESP32/Bluepad32 build.

Source: Chosen controller ecosystem

Exact Amazon item not selected.

Cortex controls
Body and Dome ESP32 controllers

Cortex option

2 boards
Body handles compatible gamepad/control mapping; Dome handles dome functions. Physical-output commissioning remains to be validated.

Source: BigBob build

Amazon candidate ↗
16-channel servo-interface boards

Cortex option

2 baseline, more for extras
32 signals leave 4–5 spare after 27–28 baseline servos. PCA9685 candidate needs firmware, logic and power validation; signal capacity is not current capacity.

Source: Proposed BigBob interface

Amazon candidate ↗
Network Cortex CYD display/hub

Cortex optional

Optional 1
Optional network/onboard display role; not required for basic Body/Dome control. Upcoming/beta, not advertised as production-ready.

Source: BigBob upcoming add-on

Amazon candidate ↗
Dome-eye AI camera / Sense

Cortex optional

Optional 1
Rotating dome eye is separate from fixed front POV. AI owner wake and autonomy are future work, not guaranteed capability.

Source: BigBob optical plan

Exact Amazon item not selected.

Fixed front, left, right and rear cameras

Cortex optional

Up to 4 optional
Rear candidate is owned ESP32-CAM OV3660. Fixed front/left/right are separate roles, not all installed; suitability/image latency needs testing.

Source: BigBob optical plan

Amazon candidate ↗
Portable HUD/display and enclosure

Cortex optional

Optional
Remote display connects as a client; onboard Network Cortex hosts network role. Hardware profile support varies.

Source: BigBob remote-display plan

Exact Amazon item not selected.

Storage and USB service/data cables

Cortex option

Per board
First USB flash then supported OTA. A standard USB hub/card reader is not automatically supported by classic ESP32 USB hardware.

Source: BigBob setup

Exact Amazon item not selected.

Consumables and tools
Two-part epoxy, finishing filler, abrasives, primer/paint

Shared

As needed
Black/copper Q5 theme or chosen finish. Use glue compatible with printed polymer; small restrained threadlocker application to metal joints.

Source: Body/Dome assembly manuals

Exact Amazon item not selected.

Servo tester, multimeter, current-limited bench supply

Shared

1 each or reused
Center servos before fitting horns; bench-check wiring and current before full-size motion.

Source: Assembly and commissioning plan

Exact Amazon item not selected.

Soldering equipment, wire stripping/crimping and hand tools

Shared

Reuse existing tools
See BigBob Approved Tools for owned models; verify tip/connector/tool compatibility.

Source: BigBob owned tools

Exact Amazon item not selected.

Source scope and remaining checks

Counts use your supplied MK4 Astromech Complex Body and MK4.1 Dome manuals, with printed page numbers. Assembly paragraphs were checked as well as hardware callouts; repeated lower-hinge screws are not double-counted. These are body/dome subtotals, not final full-droid fastener totals.

The matching leg/foot drive, center-leg and utility-arm instructions are still needed to resolve bearings, wheels, shaft adapters, motors, mechanism fixings and actuator counts. The provided body supports multiple earlier leg/drive variants. Do not combine different versions’ hardware lists.

Manufacturer references: Pololu Maestro controllers · SparkFun MP3 Trigger · Astropixels · Baddeley MKIII drive description (2019). Earlier electronics diagrams are illustrative configurations, not current universal specifications.

MK4 drive hardware

Owner-supplied hardware list, added October 10, 2026. Applies to the selected MK4 drive only. M6 entries are repeated in the supplied list: four bolts and four Nyloc nuts are retained provisionally, pending the drive assembly drawing.

Lowest suitable-cost candidates among the Amazon listings checked. Prices are pack prices, not prices for the exact consumed quantities; shared assortments are counted once. Listed matches still need the specific fit checks below.

M3 x 50 mm countersunk bolts

Listing size match | $7.99 pack

10 required
40-pack; Phillips drive. M3-0.5. Countersunk length includes head.

Owner MK4 Drive list | checked October 10, 2026

View exact Amazon listing
M3 x 20 mm button-head bolts

Pack count check | $9.99 pack

2 required
Shared M3 button-head/nut assortment; buy ONE pack for these three M3 rows. Listing includes 20 and 40 mm; verify at least 12 of the 40 mm screws in the pack.

Owner MK4 Drive list | checked October 10, 2026

View exact Amazon listing
M3 x 40 mm button-head bolts

Pack count check | $9.99 pack

12 required
Same M3 assortment; do not buy another pack. Exact count per length is not stated in the text listing.

Owner MK4 Drive list | checked October 10, 2026

View exact Amazon listing
M3 hex nuts

Shared pack | $9.99 pack

12 required
Same assortment includes matching M3 hex nuts; do not buy another pack.

Owner MK4 Drive list | checked October 10, 2026

View exact Amazon listing
M8 x 100 mm external hex-head bolts

Shank check | $7.99 pack

2 required
5-pack; M8-1.25, fully threaded A2-70 stainless. Check whether the drive drawing needs an unthreaded bearing-contact shank before buying.

Owner MK4 Drive list | checked October 10, 2026

View exact Amazon listing
M8 Nyloc nuts

Listing size match | $6.19 pack

2 required
One shared Nyloc assortment includes 8 M8-1.25 and 15 M6-1.0 nuts. Buy once for both rows.

Owner MK4 Drive list | checked October 10, 2026

View exact Amazon listing
M6 x 100 mm external hex-head bolts

Quantity / shank check | $6.59 pack

4 required
5-pack; M6-1.0, fully threaded. Owner list repeats quantity 2 twice; provisional combined quantity 4. Verify repetition and any unthreaded shank requirement against MK4 drive instructions.

Owner MK4 Drive list | checked October 10, 2026

View exact Amazon listing
M6 Nyloc nuts

Quantity check | $6.19 pack

4 required
Same Nyloc assortment; buy once. Owner list repeats quantity 2 twice; provisional combined quantity 4.

Owner MK4 Drive list | checked October 10, 2026

View exact Amazon listing
Sorbothane 40 mm hemispheres

Exact listing pending | Price pending

2 required
Owner spelling normalized from Sobothane. Exact 40 mm Amazon match not verified; hardness/durometer also unspecified. Do not substitute 1.5 inch (38.1 mm) or silicone without a fit/material check.

Owner MK4 Drive list | checked October 10, 2026

Exact Amazon match pending
M5 square nuts

Pocket fit check | $4.99 pack

2 required
100-pack; M5-0.8, listed 7.8 mm square. Thickness is not specified in the text listing; check printed nut pockets.

Owner MK4 Drive list | checked October 10, 2026

View exact Amazon listing
M5 x 25 mm countersunk bolts

Seller thread check | $6.49 pack

2 required
25-pack with hex key. Title specifies M5 x 25 mm; bullet incorrectly labels 25 mm as thread pitch. Confirm normal M5-0.8 thread with seller before purchase.

Owner MK4 Drive list | checked October 10, 2026

View exact Amazon listing
608-2RS bearings

Listing size match | $4.99 pack

4 required
10-pack; 8 mm bore x 22 mm OD x 7 mm width; title specifies double rubber seals. Cheaper B0GKLJ9R4D rejected: description says metal shields despite 2RS title.

Owner MK4 Drive list | checked October 10, 2026

View exact Amazon listing

Known unique-pack subtotal: $55.22, excluding Sorbothane, tax and shipping. This is a sourcing subtotal; unresolved fit/count checks prevent a complete approved-kit total.

About & Contact

BigBob’s Robotic Workshop — modular robot control, build resources and the Cortex system.

Workshop questions and feedback: bigbobsroboticworkshop@gmail.com