← WorkshopConnect your droid.
Keep setup simple.
Phone, tablet or PC: the same browser setup. The Network Cortex hosts your droid’s local pages.
1Join Workshop Wi-Fi
Power the Network Cortex. Open its Network screen. On your phone, tablet or PC, select the Workshop Wi-Fi name displayed there and enter the password shown on the screen.
Your device may say “No internet.” Stay connected while setting up the droid. A QR address cannot join Wi-Fi by itself.
2Open setup
Scan the setup QR or type 192.168.50.1/host-wifi into the browser address bar. Connect a saved router/MiFi, or stay on Workshop Wi-Fi.
The upcoming picker makes nearby networks visible as tap-to-select cards. It is in firmware testing; older firmware may show a different selector.
3Open the dashboard
Open 192.168.50.1/app while on Workshop Wi-Fi. On your home network, use the Network Cortex’s current Wi-Fi IP followed by /app. Check ESP Boards for live board status.
Initial firmware installation still requires USB. OTA is available only on boards with compatible update firmware already installed. Setup QRs on 2.8, 3.5 and 7-inch displays are being tested.
Try your controller before commissioning
Pair a controller with your PC or supported browser device. In the demo’s Diagnostics screen, click Start preview and press a controller button. Try turning, dome rotation, lights and the periscope.
Open controller demoSave your assignments with Download controller setup; load the JSON file back into the demo or the app’s Save your setup section.
Demo actions are simulated. Supported common assignments transfer; periscope and sound hardware assignments still require review and appear unassigned where unsupported.
Never assume the public demo is connected to a physical droid. Verify live board status and hardware setup in your local app.
bigbobsroboticworkshop@gmail.com